Campbell Hausfeld dh6500 automotive spray gun Guia Do Utilizador
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Description
Air operated spray guns are designed
to perform a variety of painting,
coating, and finishing applications
using the power of compressed air.
to perform a variety of painting,
coating, and finishing applications
using the power of compressed air.
Safety Guidelines
This manual contains information that is
very important to know and understand.
This information is provided for SAFETY
and to PREVENT EQUIPMENT PROBLEMS.
To help recognize this information,
observe the following symbols.
very important to know and understand.
This information is provided for SAFETY
and to PREVENT EQUIPMENT PROBLEMS.
To help recognize this information,
observe the following symbols.
Danger indicates
an imminently
hazardous situation which, if not
avoided, WILL result in death or serious
injury.
avoided, WILL result in death or serious
injury.
Warning indicates
a potentially
hazardous situation which, if not
avoided, COULD result in death or
serious injury.
avoided, COULD result in death or
serious injury.
Caution indicates a
potentially
hazardous situation which, if not
avoided, MAY result in minor or moderate
injury.
avoided, MAY result in minor or moderate
injury.
Notice indicates
important
information, that if not followed, may
cause damage to equipment.
cause damage to equipment.
Unpacking
After unpacking the product, inspect
carefully for any damage that may
have occurred during transit. Make sure
to tighten fittings, bolts, etc., before
putting unit into service.
carefully for any damage that may
have occurred during transit. Make sure
to tighten fittings, bolts, etc., before
putting unit into service.
Do not operate
tool if damaged
during shipping, handling or use.
Damage could result in bursting and
cause injury or property damage.
Damage could result in bursting and
cause injury or property damage.
Operating Instructions
Air Operated Models
General Safety
Information
Information
1. Read
all
manuals
included with this
product carefully. Be
thoroughly familiar with
the controls and the
proper use of the equipment.
product carefully. Be
thoroughly familiar with
the controls and the
proper use of the equipment.
2. Follow all local electrical and safety
codes as well as in the United
States, the National Electrical Codes
(NEC) and Occupational Safety and
Health Act (OSHA).
States, the National Electrical Codes
(NEC) and Occupational Safety and
Health Act (OSHA).
CALIFORNIA PROPOSITION 65
You
can
create
dust when you cut, sand,
drill or grind materials such
as wood, paint, metal,
concrete, cement, or other
masonry. This dust often contains
chemicals known to cause cancer, birth
defects, or other reproductive harm.
Wear protective gear.
drill or grind materials such
as wood, paint, metal,
concrete, cement, or other
masonry. This dust often contains
chemicals known to cause cancer, birth
defects, or other reproductive harm.
Wear protective gear.
WORK AREA
•
Never spray closer
than 25 feet to the
compressor! If possible,
locate compressor in
separate room. Never
spray into the compressor, compressor
controls or the motor.
compressor! If possible,
locate compressor in
separate room. Never
spray into the compressor, compressor
controls or the motor.
•
Do not spray flammable
materials in vicinity
of open flame or near
ignition sources. Motors,
electrical equipment
and controls can cause
electrical arcs that will ignite a
flammable gas or vapor. Never store
flammable liquids or gases in the
vicinity of the compressor.
materials in vicinity
of open flame or near
ignition sources. Motors,
electrical equipment
and controls can cause
electrical arcs that will ignite a
flammable gas or vapor. Never store
flammable liquids or gases in the
vicinity of the compressor.
IN234900AV 6/08
•
Do not smoke or eat when spraying
paint, insecticides, or other flammable
substances.
paint, insecticides, or other flammable
substances.
•
Keep hose away from sharp objects.
Bursting air hoses may cause injury.
Examine air hoses regularly and
replace if damaged.
Bursting air hoses may cause injury.
Examine air hoses regularly and
replace if damaged.
•
Always work in a clean environment.
To avoid injury or damage to the
workpiece, do not aim the spray gun at
any dust or debris.
To avoid injury or damage to the
workpiece, do not aim the spray gun at
any dust or debris.
•
Keep visitors away and NEVER allow
children or pets in the work area.
PERSONAL SAFETY
•
Use a face mask/respirator,
non-skid shoes, and
protective clothing when
spraying. Always spray in
a well ventilated area to prevent health
and fire hazards. Refer to Material
Safety Data Sheets (MSDS) of spray
material for details.
non-skid shoes, and
protective clothing when
spraying. Always spray in
a well ventilated area to prevent health
and fire hazards. Refer to Material
Safety Data Sheets (MSDS) of spray
material for details.
•
Always wear eye
protection
protection
•
Never use oxygen, carbon dioxide,
combustible gases or any bottled gas
as an air source for the spray gun.
Such gases are capable of explosion
and serious injury to persons.
combustible gases or any bottled gas
as an air source for the spray gun.
Such gases are capable of explosion
and serious injury to persons.
•
Do not misuse this product. Excessive
exposure to vibration, work in
awkward positions, and repetitive
work motions can cause injury to
hands and arms. Stop using any tool
if discomfort, numbness, tingling, or
pain occur, and consult a physician.
exposure to vibration, work in
awkward positions, and repetitive
work motions can cause injury to
hands and arms. Stop using any tool
if discomfort, numbness, tingling, or
pain occur, and consult a physician.
•
Never aim or spray at yourself or
anyone else or serious injury could
occur.
anyone else or serious injury could
occur.
MANUAL
© 2008 Campbell Hausfeld / Scott Fetzer
Spray Guns
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
See Warranty on page 8 for important information about commercial use of this product.
For parts, product & service information
visit www.chpower.com