Adaptec 7220ss Guia Do Utilizador
5-13
Configuring the Controller
2
Select Shutdown Both and press Enter.
The system confirms that you want to make the change.
3
Select Yes and press Enter to make the change.
Both controllers shut down.
4
Press Esc to return to the Other Controller menu.
Killing the Other Controller
You can kill the other controller (nongracefully shut it down),
which causes the local controller to assume control of its resources.
which causes the local controller to assume control of its resources.
Caution:
You should only use the Kill Other Function as a
last resort to regain control of the other controller. Using
Kill Other may disrupt host I/O activity. If the other
controller needs to be taken offline, you should first try a
local shutdown or use the Shutdown Other Function.
Kill Other may disrupt host I/O activity. If the other
controller needs to be taken offline, you should first try a
local shutdown or use the Shutdown Other Function.
To kill the other controller:
1
From the System Menu, select Other Controller Menu and
press Enter.
press Enter.
The Other Controller menu is only available if the system is
configured to run in active-active mode.
configured to run in active-active mode.
The Other Controller menu appears.
2
Select Kill Other and press Enter.
The system confirms that you want to make the change.
3
Select Yes and press Enter to make the change.
The system confirms that the change is made.
4
Press Esc to return to the Other Controller menu.
Unkilling the Other Controller
You can unkill the other controller (bring it back online) by
allowing it to complete booting. This option is primarily used to
allow a controller that was previously killed (either due to errors or
manual action) to come back online.
allowing it to complete booting. This option is primarily used to
allow a controller that was previously killed (either due to errors or
manual action) to come back online.
!