Marvel 6sdze-bb-g Guia Do Utilizador
INSTALLING YOUR DUAL ZONE WINE CELLAR
WARNING
This unit should not, under any circumstances, be un-
grounded.
grounded.
Grounding Method
This product is factory equipped with a power supply cord
that has a three-pronged, grounded plug. It must be
plugged into a mating grounding type receptacle in accor-
dance with the National Electrical Code and applicable lo-
cal codes and ordinances (see Figure 1). If the circuit does
not have a grounding type receptacle, it is the responsibility
and obligation of the customer to exchange the existing
receptacle in accordance with the National Electrical Code
and applicable local codes and ordinances. The third
ground prong should not, under any circumstances, be cut
or removed (see Figure 2). All U.L. listed refrigerated prod-
ucts are equipped with this type of plug.
This product is factory equipped with a power supply cord
that has a three-pronged, grounded plug. It must be
plugged into a mating grounding type receptacle in accor-
dance with the National Electrical Code and applicable lo-
cal codes and ordinances (see Figure 1). If the circuit does
not have a grounding type receptacle, it is the responsibility
and obligation of the customer to exchange the existing
receptacle in accordance with the National Electrical Code
and applicable local codes and ordinances. The third
ground prong should not, under any circumstances, be cut
or removed (see Figure 2). All U.L. listed refrigerated prod-
ucts are equipped with this type of plug.
Electrical Connection
Check the serial nameplate for the correct power supply.
Use only the electrical power supply specified on the serial
nameplate. DO NOT USE AN EXTENSION CORD.
Check the serial nameplate for the correct power supply.
Use only the electrical power supply specified on the serial
nameplate. DO NOT USE AN EXTENSION CORD.
2
Figure 1
Select Location
The proper location will ensure peak performance of your
appliance. Choose a location where the unit will be out of
direct sunlight and away from heat sources. Best perfor-
mance will be maintained when installed within the follow-
ing parameters:
The proper location will ensure peak performance of your
appliance. Choose a location where the unit will be out of
direct sunlight and away from heat sources. Best perfor-
mance will be maintained when installed within the follow-
ing parameters:
Ideal Ambient Temperature Range
Built-In
65-80
°
F
Free-Standing
65-90
°
F
Cabinet Clearance
Ventilation is required from the bottom front section of the
unit. Keep this area open and clear of any obstructions.
Adjacent cabinets and countertop can be installed on top,
back and sides of the unit as long as the grille and door
access remain unobstructed. An opening of 24 inches is
required between cabinets and a depth of 24 inches.
Ventilation is required from the bottom front section of the
unit. Keep this area open and clear of any obstructions.
Adjacent cabinets and countertop can be installed on top,
back and sides of the unit as long as the grille and door
access remain unobstructed. An opening of 24 inches is
required between cabinets and a depth of 24 inches.
Leveling Legs
The unit should be level from front to back and side to
side. If floor conditions do not allow the unit to sit level,
adjust the leg leveler(s) by turning the required leg leveler(s)
counterclockwise to increase their height and clockwise to
reduce their height.
The unit should be level from front to back and side to
side. If floor conditions do not allow the unit to sit level,
adjust the leg leveler(s) by turning the required leg leveler(s)
counterclockwise to increase their height and clockwise to
reduce their height.
Power Supply Cord with
3-prong grounding plug
3-prong grounding plug
Grounding Type Wall
Receptacle
Receptacle
Cord may be flush
with back wall
with back wall
Electrical Plug Optional Location: Cutout
shown for electrical outlet which can be
located in adjacent cabinetry.
shown for electrical outlet which can be
located in adjacent cabinetry.
Figure 2