Marvel 80rf-bb-f Guia Do Utilizador
Condenser Air Flow
The machine compartment located beneath the cabinet
does not require frequent cleaning; however, satisfactory
performance depends on adequate ventilation. Be sure
nothing obstructs the required air flow openings in front of
the cabinet. At least once or twice a year, brush or vacuum
lint and dirt from the front grille openings. See Figure 1 on
page 3.
The machine compartment located beneath the cabinet
does not require frequent cleaning; however, satisfactory
performance depends on adequate ventilation. Be sure
nothing obstructs the required air flow openings in front of
the cabinet. At least once or twice a year, brush or vacuum
lint and dirt from the front grille openings. See Figure 1 on
page 3.
Cabinet
The painted cabinet can be washed with either a mild soap
and water and thoroughly rinsed with clear water. NEVER
use abrasive scouring cleaners.
The painted cabinet can be washed with either a mild soap
and water and thoroughly rinsed with clear water. NEVER
use abrasive scouring cleaners.
Interior
Wash interior compartment with mild soap and water. Do
NOT use an abrasive cleaner, solvent, polish cleaner or
undiluted detergent.
Wash interior compartment with mild soap and water. Do
NOT use an abrasive cleaner, solvent, polish cleaner or
undiluted detergent.
Care of Unit
Avoid leaning on the door, you may bend the door
1.
hinges or tip the unit.
Exercise caution when sweeping, vacuuming or mop-
Exercise caution when sweeping, vacuuming or mop-
2.
ping near the front of the unit. Damage to the grille
can occur.
Periodically clean the interior of the unit as needed.
can occur.
Periodically clean the interior of the unit as needed.
3.
Periodically check and/or clean the front grille as
4.
needed.
Replacing the light bulb.
Unplug the power cord from the wall receptacle.
1.
Open the cabinet door.
2.
Remove the 3 screws on the front face of the light lens
3.
using a phillips screwdriver.
Remove the lens.
Remove the lens.
4.
Unscrew the existing bulb and replace with an equiva-
5.
lent 15 watt, intermediate base appliance bulb. Do not
replace with a bulb higher than 15 watts.
Reassemble parts and plug in power cord.
replace with a bulb higher than 15 watts.
Reassemble parts and plug in power cord.
6.
To clean the light assembly, disconnect the power cord and
wipe the assembly with a mildly damp cloth. Dry the unit
completely before connecting the power cord.
wipe the assembly with a mildly damp cloth. Dry the unit
completely before connecting the power cord.
CARE AND CLEANING
12