Marvel 6sbare-bb-o Guia Do Utilizador
TROUBLESHOOTING YOUR BEVERAGE REFRIGERATOR
Problem
Possible Cause
Remedy
Unit not cold enough
Adjust temperatures (See “Changing
Current Settings” on page 4 or 5)
Current Settings” on page 4 or 5)
Control set too warm
•
Airflow to front grille blocked.
•
Excessive usage or prolonged
•
drawer openings.
Door gasket not sealing properly.
Door gasket not sealing properly.
•
Adjust temperature colder. Al-
•
low 24 hours for temperature to
stabilize.
Airflow must not be obstructed to
stabilize.
Airflow must not be obstructed to
•
front grille. See “clearances” on
page 3.
Allow temperature to stabilize for
page 3.
Allow temperature to stabilize for
•
at least 24 hours.
Adjust or replace door gasket.
Adjust or replace door gasket.
•
Unit too cold
Adjust temperatures (See “Changing
Current Settings” on page 4 or 5)
Current Settings” on page 4 or 5)
Control set too cold
•
Adjust temperature warmer. (See
•
page 12, “set the desired tempera-
ture”). Allow 24 hours for tempera-
ture to stabilize.
ture”). Allow 24 hours for tempera-
ture to stabilize.
No interior light.
Failed LED interior light assembly
•
Contact a qualified Marvel service
•
technician.
Light will not go out when drawer is
closed
closed
Door not activating light switch.
•
Verify cabinet is level, refer to page
•
3 for leveling instructions.
Verify the door is aligned properly,
Verify the door is aligned properly,
•
refer to page 13 for instructions.
Noise or Vibration
Unit not level
•
Level unit, see “Leveling Legs” on
•
page 3.
Unit will not run.
Unit turned off
•
Power cord not plugged in.
•
No power at outlet.
•
Turn unit on. See “Start your Appli-
•
ance” on page 4 or 5.
Plug in power cord.
Plug in power cord.
•
Check house circuit.
•
Before You Call for Service
If the unit appears to be malfunctioning, read through this
manual first. If the problem persists, check the troubleshoot-
ing guide below. Locate the problem in the guide and refer
to the cause and its remedy before calling for service. The
problem may be something very simple that can be solved
without a service call. Some remedies listed in the Trouble-
shooting Guide are very complex. Consulting or contracting
a qualified service technician may be necessary.
If the unit appears to be malfunctioning, read through this
manual first. If the problem persists, check the troubleshoot-
ing guide below. Locate the problem in the guide and refer
to the cause and its remedy before calling for service. The
problem may be something very simple that can be solved
without a service call. Some remedies listed in the Trouble-
shooting Guide are very complex. Consulting or contracting
a qualified service technician may be necessary.
Electrocution Hazard - Never attempt to repair or perform maintenance on the unit until the main electrical power has
been disconnected.
been disconnected.
19