Revel ic6t2 Guia Do Utilizador

SYSTEM OPTIMIZATION

1. After connecting the VOICE speaker, initially set the HIGH

FREQUENCY LEVEL control on the rear panel to the “0”
position (see Figure 10). 

2. Intially set the PLACEMENT COMPENSATION control (see

Figure 10) to match the application as follows: 

• Use the 

Flush Mounted setting when the VOICE is flush-

mounted in a wall or custom-built “media wall”, or is placed
on a bookshelf.

• Use the Top of Monitor setting when the VOICE is placed

on top of a rear projection monitor.

• Use the Stand Mounted setting when the VOICE is placed

on its (optional) VOICE Pedestal.

3. Turn on the system power and play a variety of material. Slowly

increase the volume to a comfortable level and listen from your
main listening position. Be sure to set your multi-channel con-
troller to a mode that utilizes the center channel. If the VOICE
is used in a home theater system, listen to well-recorded dialog
from more than one film, as the sound quality can vary greatly. 

VOICE Rear

Connector Panel

Set High-Frequency

Level Control To “0”

Set Placement Compensation Control
To Match VOICE Placement

Bass

Increases