Revel gem Instrução De Instalação

Harman Specialty Group

3 Oak Park Drive

Bedford, MA  01730-1413

USA

Tel 781-280-0300

Fax 781-280-0490

www.revelspeakers.com

Customer Service

Tel 781-280-0300

Fax 781-280-0495 (Sales)

Fax 781-280-0499 (Service)

Revel Part No. 363812-001 |  Rev 0 |  03/07

Step 1: Place the packing carton down so that the long side of the carton that’s marked “Open this Side”
is facing up. 

Step 2: Open both the outer box and inner box so that one side of the packaged pedestal is exposed.

Step 3: Without allowing the flaps to close, invert the carton so that the open flaps of both boxes are on
the bottom.

Step 4: Lift the cartons up and off the stand.

Step 5: Remove the Top End Pad from the top of the pedestal and the Base End Pad from the bottom of
the pedestal.

Step 6: Remove the Cardboard Sleeve and the Middle Pads.

Step 7: Remove the cloth bag. Handle carefully to ensure that the pedestal isn’t scuffed or bumped.

You are now ready to start the installation procedure. Turn this sheet over to proceed.

NOTE: Save all original packaging materials.

Accessory Bag

Top End Pad

Cloth Bag

Base End Pad

Cardboard Sleeve

Middle Pads

Pedestal