Revel studio Guia Do Utilizador

SYSTEM OPTIMIZATION

1. After connecting the REVEL ULTIMA STUDIO loudspeakers,

initially set both HIGH FREQUENCY LEVEL controls on
both rear panels to the “0” position, as shown in Figure 13. 

2. Turn on the system power and play a favorite piece of music.

Slowly increase the volume to a comfortable level and listen
from your main listening position. If desired, experiment with
placement (see page 8) to achieve the best overall tonal balance,
image specificity, and spaciousness.

3. You may also wish to further adjust the HIGH FREQUENCY

LEVEL controls (see Figure 13) for both front and rear tweet-
ers to achieve the most natural sound in your room. Varying
the FRONT control will change the high frequency balance
and timbre. Varying the REAR control will mainly affect “air”
and spaciousness. Do not hesitate to experiment with changes
to the front and rear high frequency level controls. Differences
in room acoustics often demand different level control settings. 

Set Both Tweeter

Level Controls

To “0”