Revel studio Guia Do Utilizador

Figure 17. Overall dimensions
for the REVEL ULTIMA
STUDIO loudspeaker.

SPECIFICATIONS (CONTINUED)

Frequency Responses:

Listening Window Response;

(continued)

+ 1.5 dB from 31 Hz to 20 kHz

This improved “on-axis” measurement reduces the visual confusion
of inaudible local interference, yet still retains full accuracy without
using “spectral smoothing” which results in significant data loss.

Low Frequency Extension;
-10 dB @ 22 Hz, -6 dB @ 26 Hz, and
-3 dB @ 33 Hz

Studies have shown that the -10 dB low frequency extension speci-
fication is the one that best correlates to controlled listening tests.
At low frequencies, most loudspeaker/room combinations will
exhibit significant “room gain”, which is an increasing rise in level
as frequencies decrease. In addition, the -10 dB specification reflects
the steepness (i.e., order) of the low-frequency roll-off, which is not
significantly indicated in -3 dB specifications.

Dimensions:

⁄

"H x 12

⁄

"W x 19

⁄

" D

1,114 mm H x 324 mm W x 492 mm D
(include grilles; add 1

⁄

" or 38 mm for spikes;

also refer to Figure 17 below)

Weight:

164 lb (74.4 kg) each carton

Revel constantly strives to update and improve existing products, as well as create new ones. Therefore the specifi-
cations and construction details in this and related Revel publications are subject to change without notice. Revel is
a registered trademark of Revel, Inc.

REVEL ULTIMA STUDIO

Owner’s Manual

,,,,,,

19 3/8"

(492 mm)

43 7/8"

(1,114 mm)

1 1/2"

(38.1 mm)

12 3/4"

(324 mm)