Baumatic bf150 Manual Do Utilizador
Ensure there is sufficient space behind the cooling
coils at the back of your Fridge – 12.7cm (5”) is ideal!
coils at the back of your Fridge – 12.7cm (5”) is ideal!
REVERSING THE DOOR OPENING (swing of the door):
1)
Remove the screws (6) which fix
the steel plate (10).
2)
Take away the steel plate (10) and
lift the door. Put the door on a soft
surface to keep it from getting
surface to keep it from getting
scratched.
3)
Remove the two screws (8) that
hold the lower hinge (2) and make
sure to remove the lower hinge (2)
sure to remove the lower hinge (2)
4)
Take off the front left leg (4) and
transfer it to the right side.
transfer it to the right side.
5)
Before placing this lower hinge (2),
remove the bolt-pin (9) and
remove the bolt-pin (9) and
reverse the direction of the lower
hinge (2). Then install the lower
hinge (2). Then install the lower
hinge (2) onto the left side of the
lower frame with two screws (8).
6)
Insert the bolt-pin (9) into the lower
hinge (2).
7)
Take off the upper hinge (7) on the
right hand side of the steel plate (10)
and install the upper hinge (7) on the
and install the upper hinge (7) on the
left side of the steel plate (10).
8)
Set the door in place making sure the
door seats into the lower hinge (2).
9)
While holding the door closed, put the
upper hinge (7) into the door hinge
hole and secure the steel plate (10) in
hole and secure the steel plate (10) in
the top frame with the screws (6).
Please remember not to tighten the
Please remember not to tighten the
screws (6) until the top of the door is
levelled with the counter top.
levelled with the counter top.