Crate fw65 Manual Do Utilizador

Página de 12
FlexWave65/112 Guitar Amplifier w/DSP and Channel Tracking
7
19. REVERB: Use this control to adjust 
the amount of digital reverb effect. In its 
fully counterclockwise position, the signal 
will be “dry” (without reverb). As you rotate 
this control clockwise, the amount of reverb 
increases.
20. MOD: Use this control to select the 
type of digital modulation effect. In its fully 
counterclockwise position, the signal will 
be “dry” (without modulation). As you rotate 
the control clockwise, you can select from 
The DSP Section
three chorus settings, three flanger settings, 
or three phaser settings. The chart below 
describes these effects.
21. DELAY: Use this control to select the 
type of digital delay effect. In its fully coun-
terclockwise position, the signal will be “dry” 
(without delay). As you rotate the control 
clockwise, you can select from three slap 
settings, three medium delay settings, or 
three long delay settings. The chart below 
describes these effects.
Effect Setting 
Description
Chorus 1 
Chorus with low depth
Chorus 2 
Chorus with medium depth
Chorus 3 
Chorus with high depth
Flanger 1 
Flanger with low depth
Flanger 2 
Flanger with medium depth
Flanger 3 
Flanger with high depth
Phaser 1 
Phaser with low feedback
Phaser 2 
Phaser with medium feedback
Phaser 3 
Phaser with high feedback
Slap 1 
Single short delay with low level
Slap 2 
Single short delay with medium level
Slap 3 
Single short delay with high level
Medium 1 
Multiple repeats with low level and medium length
Medium 2 
Multiple repeats with medium level and medium length
Medium 3 
Multiple repeats with high level and medium length
Long 1 
Multiple repeats with low level and long length
Long 2 
Multiple repeats with medium level and long length
Long 3 
Multiple repeats with high level and long length
Signal Path 
 
MOD + DELAY + REVERB 
SLAP
LONG
MEDIUM
DELAY
MOD
REVERB
POWER
CHORUS
PHASER
FLANGER
EFFECTS
CD
INPUT
19
20
21