Panasonic AJ-HPX2000 Manual Do Utilizador

54

Adjustments and Settings for Recording : Selecting Audio Input Signals and Adjusting Recording Levels

To adjust the recording levels for Audio Channels 1 and 2,
follow the steps below.

Position the MONITOR SELECT  CH1/2 / CH3/4-
selector switch at CH1/2 so that the audio level meter 
on the display window will provide CH1 and CH2 
indications. Ensure that the channel indications 
displayed in the window are 1 and 2. 
Whether to enable or disable the FRONT AUDIO 
LEVEL control must be preset through menu options 
FRONT VR CH1 and FRONT VR CH2. Note that this 
control is factory-disabled.
The menu options are found in the MIC/AUDIO1 
screen, which is accessible from the MAIN 
OPERATION page.

Position the AUDIO SELECT CH1/CH2 switch at 
[MAN]. 

While checking the audio channel level meter in the 
display window or the audio level meter in the 
viewfinder, adjust the AUDIO LEVEL CH1/CH2 
control.
Note that if the level exceeds the top bar (0 dB), the 
word OVER illuminates to show that the input level is 
excessive. The adjustment made in such a way that 
the maximum level will not reach the 0 dB bar. 

When operating the unit without a sound recordist, it is
recommended that the FRONT AUDIO LEVEL control
should be used to adjust the audio level. 
In advance, check the level meter in the viewfinder screen
and use the AUDIO LEVEL control to adjust the
appropriate audio channel so that no excessive audio
signals will be admitted.

This function enables the recording level to be adjusted
using the F.AUDIO LEVEL control.
To select this function, perform menu operations to open
the <MIC/AUDIO> screen from the MAIN OPERATION
page, and set whether to enable or disable the F.AUDIO
LEVEL controls for the system selected as the input
signals using the FRONT VR CH1 and FRONT VR CH2
items.

The following table shows the effects on the recording level
for Audio Channels 3 and 4 that depend on the settings
and input levels specified through the menu options AUTO
LEVEL CH3 and AUTO LEVEL CH4. Note that the
recording level cannot be adjusted manually.
These options are found in the <MIC/AUDIO1> screen,
which is accessible from the MAIN OPERATION page. 

Adjusting Recording Levels

         F:1----            
         R:2---- ---+

∫
∫

Selecting Function for the FRONT AUDIO LEVEL Control

# < MIC/AUDIO1 >

 FRONT VR CH1        :OFF
 FRONT VR CH2        :OFF
 MIC LOWCUT CH1      :OFF
 MIC LOWCUT CH2      :OFF
 MIC LOWCUT CH3      :OFF
 MIC LOWCUT CH4      :OFF
 LIMITER CH1         :OFF
 LIMITER CH2         :OFF
 AUTO LEVEL CH3      :ON
 AUTO LEVEL CH4      :ON
 25M REC CH SEL      :2CH
 TEST TONE           :NORMAL

CH3 and CH4 Recording Levels

AGC ON

AGC ON

AGC/LIMITER OFF

LIMITER ON

AJ-HPX2000P(VQT1D27-1)E.book  54 ページ  ２００７年７月３０日　月曜日　午後１時３１分