Panasonic NV-GS150 Manual Do Utilizador

Página de 88
Record mode
31
LSQT0861
Zoom in/out function
You can zoom in up to 10
k optically.
Set to Tape/Card Recording Mode.
1
Wide-angle recording (zoom out):
Push the [W/T] lever towards [W].
Close-up recording (zoom in):
Push the [W/T] lever towards [T].
≥When zooming in and taking a picture while 
holding the Camcorder by hand, we recommend 
using the image stabilizer function.
≥When you are zooming on a faraway subject, a 
sharper focus is achieved if the recording 
subject is 3.9 feet (1.2 m) or further from the 
Camcorder.
≥When the zoom speed is high, the subject may 
not be focused easily.
≥When the zoom magnification is 1k, the 
Camcorder can focus on a subject approx. 
1.6 inches (4 cm) distant from the lens.
ª
Digital zoom function
If the zoom magnification exceeds 10 times, then 
the digital zoom function will be activated. The 
digital zoom function allows you to select a 
magnification from 25
k to 700k.
1
Set [ADVANCE] >> [D.ZOOM] >> [25
k] or 
[700
k].
[OFF]:
Optical zoom only (Up to 10
k) 
[25
k]:
Up to 25
k
[700
k]: Up to 700k
≥The larger the digital zoom magnification, the 
more the image quality is degraded.
≥When the Card Recording mode is used, the 
digital zoom function cannot be used.
ª
To use the zoom microphone function
Interlocked with the zooming operation, the 
microphone will clearly capture sounds far away 
with the tele-shot or those in the vicinity with the 
wide-angle shot.
Set to Tape Recording Mode.
1
Set [ADVANCE] >> [ZOOM MIC] >> [ON].
ª
About the variable speed zoom 
function
≥When pushing the [W/T] lever as far as it will go, 
you can zoom from 1
k to 10k in 2.1 second at 
the maximum.
≥The zoom speed varies according to the amount 
of movement of the [W/T] lever.
≥For the Magic Wire Remote Control with 
Narration Mic, the zoom speed changes in 
2 stages.
≥The variable speed zoom function cannot be 
used with the remote control.
Recording yourself
You can record yourself while viewing the LCD 
monitor. You can record persons in front of the 
Camcorder while showing them the image. The 
image is horizontally flipped as if you see a mirror 
image. (The image to be recorded is the same as 
that recording.) 
1
Rotate the LCD monitor towards the lens 
side.
≥When the LCD monitor is opened, the 
viewfinder will be automatically turned off. If the 
LCD monitor is rotated towards the lens side 
though, then the viewfinder will be activated.
≥When the LCD monitor is rotated towards the 
lens side, the icon will not be displayed even if 
you push the center of the joystick.
VOL
1
tW
5
tW
10
tW
T
T
T
25
tW
T
ZOOM
LSQT0861Eng.book  31 ページ  2004年12月22日 水曜日 午後2時34分