Panasonic pv-gs34 Manual Do Utilizador

Others

NO CARD:

No card is inserted.

CARD FULL:

Card does not have sufficient memory remaining.
Select Picture Playback Mode and delete 
unnecessary files.

NO DATA:

There are no recorded files on the card.

UNPLAYABLE CARD:

You are attempting to play back data not 
compatible with this Camcorder.

FILE LOCKED:

You are attempting to erase protected files.

CARD LOCKED:

The write protection switch on the SD Memory 
Card is set to [LOCK].

CHANGE MODE TO USE USB:

The USB Cable is connected to the Camcorder in 
Card Recording Mode.

CANCEL NIGHT VIEW MODE:

You are attempting to select an item other than 
[OFF] in [   SCENE MODE] during MagicPix 
Mode.

DISCONNECT USB CABLE:

You are attempting to turn the Mode Dial in PC 
Mode with the USB Cable connected to the 
Camcorder.
You are attempting to record pictures on a 
Tape/Card with the USB Cable connected to the 
Camcorder.

PC DOES NOT SUPPORT USB2.0:

The Camcorder is connected to a personal 
computer that does not support USB2.0.

CAN NOT USE USB:

You are connecting the USB Cable with the DV 
Cable connected.

CHANGE TO MANUAL MODE:

You are attempting to select an item other than 
[OFF] in [   SCENE MODE] when the [AUTO/
MANUAL/FOCUS] Switch is set to [AUTO].

TURN OFF THE VIDEO LIGHT:

You are attempting to select an item in [   
SCENE MODE] when Light is on.

„

•  When the Camcorder has been used for a long time, 

the Camera body becomes warm, but this is not a 
malfunction.

•  If the [CHARGE] Lamp does not light up although 

the Battery is attached to the AC Adaptor, detach the 
Battery and reattach it.

„

•  When inserting a previously recorded Cassette, 

use the Blank Search Function (p. 23) to find the 
position where you want to continue recording. If you 
overwrite-record on a previously recorded cassette, 
be sure to find the position where you want to 
continue recording.

•  If a new Cassette is inserted, rewind to the beginning 

of the tape before starting recording.

•  When inserting the cassette, make sure it faces in 

the right direction and then push it in until it stops.

•  When the Cassette Holder is in action, do not touch 

anything except the [PUSH] mark.

•  Close the Cassette Compartment Cover tightly.
•  When closing the Cassette Compartment Cover, 

do not get anything, such as a cable, caught in the 
cover.

„

When [   BEEP SOUND] on the [   SETUP] is set to 
[ON], confirmation/alarm beeps are issued as follows.
1 Beep

•  When you start recording
•  When you turn on the power

2 Beeps

•  When you pause recording

2 Beeps 4 times

•  When a cassette with its erasure prevention tab 

set to [SAVE] is inserted, condensation occurs, 
and at other times. Check the sentence displayed 
on the screen.

„

•  Even if the [   SHTR EFFECT] is set to [ON], the 

Shutter Effect cannot be recorded on the picture.

•  When the color of the screen changes or blurs, 

adjust the shutter speed manually to 1/60 or 1/100.

•  Photoshot Recording results in slightly inferior image 

quality.

•  For the number of still pictures to be recorded on a 

card, refer to page 24.

•  The sound cannot be recorded.
•  While data is being recorded on a card, do not 

operate the Mode Dial.

•  When the Access Lamp is lit, do not insert or remove 

a card.

•  Another product may degrade or not play back data 

recorded on this Camcorder.

•  If set [   PICT. QUALITY] >> [   ], mosaic-pattern 

noise may appear on a playback image depending 
on the picture content.

•  One more still picture may be recorded after you 

release the [PHOTO SHOT] Button. 

• If [   BASIC] >> [   SELF TIMER] >> [YES] is set, 

the Camcorder records the maximum number of 
pictures recordable.