Panasonic vdr-m30 Guia Do Utilizador
67
QR34662
Recording Images from Other AV Devices
You can record images from other AV devices to disc or card in this DVD Palmcorder.
Connecting to Other AV Device
Use the AV/S input/output cable (provided) to connect the DVD Palmcorder to the other AV device as
follows:
follows:
Note
:
•
If you operate the DVD Palmcorder connected to another
device, always power the camera/recorder from AC outlet
using the AC adapter/charger.
device, always power the camera/recorder from AC outlet
using the AC adapter/charger.
•
If you use a Panasonic VCR, it will be operated by the
remote controller provided with the DVD Palmcorder.
When recording an image from a Panasonic VCR,
change the remote control code of the VCR to other than
“VCR2”.
remote controller provided with the DVD Palmcorder.
When recording an image from a Panasonic VCR,
change the remote control code of the VCR to other than
“VCR2”.
•
This DVD Palmcorder cannot record S-VIDEO input
signal.
signal.
•
If you connect the AV/S input/output cable to the DVD
Palmcorder, you can’t use the external microphone jack.
Palmcorder, you can’t use the external microphone jack.
•
Reduce the volume of external input sound heard from
the built-in speaker: The loud volume may cause noise to
enter the recorded image.
the built-in speaker: The loud volume may cause noise to
enter the recorded image.
To AV input/output jack
AV/S input/output cable
(provided)
(provided)
To video/
audio output
jacks
audio output
jacks
Red
Yellow
White
Attach ferrite core to control
radio noise emission
radio noise emission
VDR-M30PP_GB.book Page 67 Friday, March 14, 2003 8:53 PM