Panasonic SDR-SW20 Manual Do Utilizador
![Panasonic](https://files.manualsbrain.com/attachments/8f677e63fb64cbb6c62d09e6242996e7631380a8/common/fit/150/50/34d700d3fb727c767799b2da5cc474b219c0a4312e9e3044c99491a2fb9a/brand_logo.png)
62
VQT1M21
Connect the unit and AC adaptor (P.22), and set the mode dial to a setting
other than [OFF].
Connect the unit and printer with the USB cable (supplied).
Insert the plugs as far as they will go.
Select [PictBridge].
Select the still pictures to print.
Number of
copies (Max. 9)
copies (Max. 9)
Set the number of copies.
• To not print the picture, set “0”.
• Repeat steps
• To not print the picture, set “0”.
• Repeat steps
and
to select up to 8 still
pictures for printing.
● Do not use any other USB connection cables except the supplied one.
(Operation is not guaranteed with any other USB cables.)
● Connect the unit directly to the printer without going through a USB hub.
● For paper size and print quality, etc., check printer settings.
● Avoid the following operations during printing. Otherwise, pictures will not print
● For paper size and print quality, etc., check printer settings.
● Avoid the following operations during printing. Otherwise, pictures will not print
correctly:
• Disconnecting the USB cable
• Opening the card/battery door
• Rotating the mode dial
• Shutting off power
• Opening the card/battery door
• Rotating the mode dial
• Shutting off power
With other
products
3
Printing pictures from
PictBridge printers
PictBridge printers