Panasonic DBS 576 Manual Suplementar
4-36
DBS 576HD (USA) issued September 2001
576-50-700
Chapter 7. SLT Features
Section 700 - Operation
Operation
To set SSD numbers:
Hardware Requirements
•
N/A
Related Programming
•
N/A
Considerations
•
N/A
Action
Result
1. If not already in User Maintenance mode, enter User Main-
81-
User MAINT displays
User MAINT displays
2. At the 81 level, enter 02.
3. Press the HOLD key.
8102-
SSD Assignment displays
SSD Assignment displays
4. Press the HOLD key.
0
:
SSD Number displays
5. Press the HOLD key.
Enter SSD # displays
6. Enter the SSD bin number (00-79 or 000-799).
7. Press the HOLD key.
-SSDXXX
XXX displays (where
XXX = SSD bin number)
8. Enter the SSD digits to be dialed.
Note: Press the FLASH key to clear an entry or any exist-
ing data.
ing data.
9. Press the HOLD key to store the entry.
Next SSD bin number displays
10. To set additional SSD numbers, press the volume up or
down key or press the HOLD key to move to the desired
SSD.
SSD.
Desired SSD bin number displays
11. Repeat steps 8-10 until all SSDs are entered.
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
To exit the User Maintenance mode, press the ON/OFF
key.
81-
User MAINT displays
OR...
ON/OFF LED goes off
User MAINT displays
OR...
ON/OFF LED goes off