Whirlpool WGD7990X Manual Do Utilizador

Operate your dryer only when you are home.  

If moving, or not using your dryer for a period of time, follow 

these steps:
1.  Unplug or disconnect power to dryer.
2.  Gas Models: Close shutoff valve in gas supply line.
3.  Clean lint screen. See “Cleaning the Lint Screen.”
4.  Steam Models Only: Turn off the water supply to the 

dryer. This helps to avoid unintended flooding (due to  

a water pressure surge) while you are away.

Follow the “Installation Instructions” to locate, level, and 

connect the dryer.

Water Inlet Hose 
Replace inlet hose and hose screen after 5 years of use 

to reduce the risk of hose failure. Periodically inspect and 

replace inlet hose if bulges, kinks, cuts, wear, or leaks are 

found. 
When replacing your inlet hoses, record the date of  

replacement. 
To winterize dryer

1.  Unplug dryer or disconnect power.
2.  Shut off water faucet.
3.  Disconnect water inlet hose from faucet and drain.

1.  Flush water pipes. Reconnect water inlet hose to faucet. 

Turn on water faucet.

2.  Plug in dryer or reconnect power.

Lint should be removed every 2 years, or more often, 

depending on dryer usage. Cleaning should be done by  

a qualified person.

Lint should be removed every 2 years, or more often, 

depending on dryer usage.

1.  Unplug the power supply cord. 
2.  Steam models only: Shut off water faucet.
3.  Steam models only: Disconnect the water inlet  

hose from faucet, then drain the hose. Remove the hose 

from the back of the dryer. Transport hose separately.

4.  Make sure leveling legs are secure in dryer base.
5.  Use tape to secure dryer door.

1.  Turn off power at fuse or breaker box.
2.  Disconnect wiring.
3.  Steam models only: Shut off water faucet.
4.  Steam models only: Disconnect the water inlet  

hose from faucet, then drain the hose. Transport  

hose separately.

5.  Make sure leveling legs are secure in dryer base.
6.  Use tape to secure dryer door.