Bakers Pride coc-e1 Instrução De Instalação

~

Q:\1035 Latch Replacement (I)

1992-12-02 Rev.OI

DOOR LATCH & CATCH REPLACEMENT INSTRUCTIONS

Do not start work without all the necessary components. This Latch & Catch installation requires the following 
items:

1.

The Installation kit, consisting of:

a) 1 

- 

Installation Instructions (3 pages)

b) 1 

- 

Drawing (1035 LATCH & CATCH)

c) 1 

- 

Door Latch Assembly (LH S3030A) or (RH S3098A) complete with:

d) 1-3/8-16x 1" hex. Bolt Q2301A
e) 5 - 3/8" Flat Steel Washers Q3042A
f)

2 

- 

3/8" Flat Brass Washers Q

g) 1 

- 

3/8" Wavy Spring Washers Q

h) 1 - 3/8-16 hex. shipping nut Q2306A
i)

1 

- 

5/16 x 2 1/2" Spring S3005A

J)  2 - extra 3/8" Flat Steel Washers Q3042A
K)  1 - Door Catch (LH S3029A) or (RH S3097 A)
I)

4- 1/4-28 Flat Head Screws Q2008A

 
2.

Recommended tools such as:

m) 1 

- 

1/4" wide flat blade screw driver

n) 1 - 3/8" Ratchet Drive
0) 1 - 6" Extension Piece
p) 1 - 9/16" hex. socket
q) 1 - 7/16" hex. socket
r)

1 - 9/16" wrench

s)

1 -7/16" wrench

t)

Some Hi-Temperature Grease

1. 

Turn off electric power to the unit.

2. 

Remove the access cover on the side, open the control panel and secure out of the way.

3. 

Remove the micro-switch from its bracket and secure out of the way.

4. 

Open the door, disengage and discard the latch spring, remove and discard the latch, the 3/8"
hex. bolt and the old steel washers.

5. 

From the new 3/8-16 bolt remove the hex. shipping nut, apply some grease on both sides of
the latch and between the washers, then fasten it to the latch box and tighten firmly (see fig 1).

1 of 4