Sony MEX-BT3700U Guia Do Utilizador

Página de 64
16
Operating an iPod directly
— Passenger control
You can operate an iPod connected to the dock 
connector directly.
1
During playback, press and hold 
(MODE).
“MODE IPOD” appears and you will be able 
to operate the iPod directly.
To change the display items
Press (DSPL).
The display items change as follows:
Track name 
t Artist name t Album name t 
MODE IPOD 
t Clock
To exit the passenger control
Press and hold (MODE).
Then “MODE AUDIO” will appear and the play 
mode will change to “RESUMING.”
Notes
• The volume can be adjusted only by the unit.
• If this mode is canceled, the repeat setting will be 
turned off.
Bluetooth (Handsfree calling 
and Music streaming)
Bluetooth operations
To use the Bluetooth function, the following 
procedure is necessary.
1
Pairing
When connecting Bluetooth devices for the 
first time, mutual registration is required. This 
is called “pairing.” This registration (pairing) 
is required only for the first time, as this unit 
and the other devices will recognize each 
other automatically from the next time. You 
can pair up to 8 devices. (Depending on the 
device, you may need to input a passcode for 
each connection.)
2
Connection
To use the device after pairing is made, start 
the connection. Sometimes pairing allows to 
connect automatically.
3
Handsfree calling/Music streaming
You can talk handsfree and listen to music 
when the connection is made.
Pairing
First, register (“pair”) a Bluetooth device 
(cellular phone, etc.) and this unit with each 
other. You can pair up to 8 devices. Once pairing 
is established, there is no need for pairing again.
1
Place the Bluetooth device within 1 m 
(3 ft) of this unit.
2
Press and hold (BT) until “
” flashes 
(about 5 seconds).
The unit enters pairing standby mode.
Support site
http://esupport.sony.com
http://www.xplodsony.com/
flashing