3com 5500-ei pwr Guia De Configuração Rápida
48
C
HAPTER
3: S
ETTING
U
P
FOR
M
ANAGEMENT
Pre-requisites
■
Documentation supplied with the SNMP network management
application software.
application software.
The default read community string is public. To change this setting in
System View, enter display snmp community.
System View, enter display snmp community.
The default write community string is private. To change this setting in
System View, enter display snmp community.
System View, enter display snmp community.
To manage your Switch using an SNMP network management
application, you need to specify SNMP community strings for the users
defined on the Switch. You can do this using the command line interface
system management snmp community
application, you need to specify SNMP community strings for the users
defined on the Switch. You can do this using the command line interface
system management snmp community
command — refer to the
command line interface section of the “SuperStack 4 Switch Command
Reference Guide” for more information.
Reference Guide” for more information.
SNMP V3 is on as default. All commands are in snmp menu in System
View.
View.
Default Users and
Passwords
Passwords
If you intend to manage the Switch using the web interface or the
command line interface, or to change the default passwords, you need to
log in with a valid user name and password. The Switch has three default
user names, and each user name has a different password and level of
access. These default users are listed in
command line interface, or to change the default passwords, you need to
log in with a valid user name and password. The Switch has three default
user names, and each user name has a different password and level of
access. These default users are listed in
CAUTION: To protect your Switch from unauthorized access, you must
change all three default passwords as soon as possible, even if you do not
intend to actively manage your Switch.
change all three default passwords as soon as possible, even if you do not
intend to actively manage your Switch.
Table 13 Default Users
User
Name
Name
Default
Password Access Level
Password Access Level
monitor
monitor
monitor — the user can view all manageable parameters,
except special/security features, but cannot change any
manageable parameters
except special/security features, but cannot change any
manageable parameters
manager
manager
manager — the user can access and change the
operational parameters but not special/security features
operational parameters but not special/security features
admin
(no
password)
password)
security — the user can access and change all manageable
parameters
parameters
DUA1715-0AAA02.book Page 48 Wednesday, March 23, 2005 11:17 AM