3com 5500-ei pwr Instrução De Instalação

 

1-30 

Figure 1-6 Network diagram for the Jitter test 

 

 

 

z 

Configure remote-ping Server (Switch B): 

# Enable the remote-ping server and configure the IP address and port to listen on.  

<Sysname> system-view 

[Sysname] remote-ping-server enable 

[Sysname] remote-ping-server udpecho 10.2.2.2 9000 

z 

Configure remote-ping Client (Switch A): 

# Enable the remote-ping client. 

<Sysname> system-view 

[Sysname] remote-ping-agent enable 

# Create a remote-ping test group, setting the administrator name to administrator and test tag to 

Jitter. 

[Sysname] remote-ping administrator Jitter 

# Configure the test type as jitter  

[Sysname-remote-ping-administrator-Jitter] test-type Jitter 

# Configure the IP address of the remote-ping server as 10.2.2.2.  

[Sysname-remote-ping-administrator-Jitter] destination-ip 10.2.2.2 

# Configure the destination port on the remote-ping server.  

[Sysname-remote-ping-administrator-Jitter] destination-port 9000 

# Configure to make 10 probes per test.  

[Sysname-remote-ping-administrator-http] count 10 

# Set the probe timeout time to 30 seconds. 

[Sysname-remote-ping-administrator-Jitter] timeout 30 

# Start the test.  

[Sysname-remote-ping-administrator-Jitter] test-enable 

# Display test results 

[Sysname-remote-ping-administrator-Jitter] display remote-ping results administrator 

Jitter 

remote-ping entry(admin administrator, tag Jitter) test result: 

      Destination ip address:10.2.2.2 

      Send operation times: 100             Receive response times: 100 

      Min/Max/Average Round Trip Time: 9/21/13 

      Square-Sum of Round Trip Time: 18623