3com 5500-ei pwr Instrução De Instalação
4-19
z
Configuring ASBR route summarization for imported routes.
Follow these steps to configure ABR route summarization:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Enter OSPF view
ospf [ process-id [ router-id
router-id ] ]
router-id ] ]
—
Enter area view
area area-id
—
Enable ABR route
summarization
summarization
abr-summary ip-address mask
[ advertise | not-advertise ]
[ advertise | not-advertise ]
Required
This command takes effect only
when it is configured on an
ABR. By default, this function is
disabled on an ABR.
when it is configured on an
ABR. By default, this function is
disabled on an ABR.
Follow these steps to configure ASBR route summarization:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Enter OSPF view
ospf [ process-id [ router-id
router-id ] ]
router-id ] ]
—
Enable ASBR route
summarization
summarization
asbr-summary ip-address mask
[ not-advertise | tag value ]
[ not-advertise | tag value ]
Required
By default, summarization of
imported routes is disabled.
imported routes is disabled.
Configuring OSPF to Filter Received Routes
Follow these steps to configure OSPF to filter received routes:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Enter OSPF view
ospf [ process-id [ router-id
router-id ] ]
router-id ] ]
—
Configure to filter the
received routes
received routes
filter-policy { acl-number | ip-prefix
ip-prefix-name | gateway
ip-prefix-name } import
ip-prefix-name | gateway
ip-prefix-name } import
Required
By default, OSPF does not filter
received routing information.
received routing information.
OSPF is a dynamic routing protocol based on link state, with routing information hidden in LSAs.
Therefore, OSPF cannot filter any advertised or received LSA. In fact, the filter-policy import
command filters the routes calculated by SPF algorithm (namely, routes in the OSPF routing table); only
the routes passing the filter can be added to the routing table.