3com 5500-ei pwr Instrução De Instalação

 

2-12 

Set the timeout time for the 
user interface 

idle-timeout minutes 
[ seconds ] 

Optional 

The default timeout time of a user 
interface is 10 minutes. 

With the timeout time being 10 
minutes, the connection to a user 
interface is terminated if no 
operation is performed in the user 
interface within 10 minutes. 

You can use the idle-timeout 0 
command to disable the timeout 
function. 

 

Note that if you configure to authenticate the users in the scheme mode, the command level available to 

users logging in to a switch depends on the command level specified in the service-type terminal 

[ level level ] command.  

Assume the switch is configured to allow users to log in through Telnet, and the user level is set to the 

administrator level (level 3). Perform the following configurations for users logging in through the 

console port (AUX user interface). 

z 

Configure the local user name as guest. 

z 

Set the authentication password of the local user to 123456 (in plain text). 

z 

Set the service type of the local user to Terminal and the command level to 2. 

z 

Configure to authenticate the users in the scheme mode. 

z 

The baud rate of the console port is 19,200 bps. 

z 

The screen can contain up to 30 lines. 

z 

The history command buffer can store up to 20 commands. 

z 

The timeout time of the AUX user interface is 6 minutes. 

Figure 2-7 Network diagram for AUX user interface configuration (with the authentication mode being 

scheme)