3com 5500-ei pwr Instrução De Instalação

 

1-50 

Figure 1-32 Switch acts as client and first-time authentication is not supported 

 

 

z 

Configure Switch B 

# Create a VLAN interface on the switch and assign an IP address for it to serve as the destination of 

the client. 

<SwitchB> system-view 

[SwitchB] interface vlan-interface 1 

[SwitchB-Vlan-interface1] ip address 10.165.87.136 255.255.255.0 

[SwitchB-Vlan-interface1] quit 

 

Generating the RSA and DSA key pairs on the server is prerequisite to SSH login.  

 

# Generate RSA and DSA key pairs. 

[SwitchB] public-key local create rsa 

[SwitchB] public-key local create dsa 

# Set AAA authentication on user interfaces. 

[SwitchB] user-interface vty 0 4 

[SwitchB-ui-vty0-4] authentication-mode scheme 

# Configure the user interfaces to support SSH. 

[SwitchB-ui-vty0-4] protocol inbound ssh 

# Set the user command privilege level to 3. 

[SwitchB-ui-vty0-4] user privilege level 3 

[SwitchB-ui-vty0-4] quit 

# Specify the authentication type for user client001 as publickey. 

[SwitchB] ssh user client001 authentication-type publickey