3com 5500-ei pwr Guia De Referência

 

1-7 

# Name channel 0 as “execconsole”. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] info-center channel 0 name execconsole 

info-center console channel { channel-number | channel-name } 

undo info-center console channel 

System view 

channel-number: Channel number, ranging from 0 to 9, corresponding to the 10 channels of the 

system. 

channel-name: Channel name, by default, the name of channel 0 to channel 9 is (in turn) console, 

monitor, loghost, trapbuffer, logbuffer, snmpagent, channel6, channel7, channel8, channel9. 

Use the info-center console channel command to set the channel through which information is output 

to the console.  

Use the undo info-center console channel command to restore the default channel through which 

system information is output to the console. 

By default, output of information to the console is enabled with channel 0 as the default channel (known 

as console). 

This command works only when the information center is enabled. 

Related commands: info-center enable and display info-center. 

# Configure to output information to the console through channel 0. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] info-center console channel 0 

info-center enable 

undo info-center enable 

System view