3com 5500-ei pwr Guia De Referência

 

1-3 

z 

Leave timer 

z 

LeaveAll timer 

z 

Hold timer 

Related commands: garp timer, garp timer leaveall. 

# Display the settings of the GARP timers on port Ethernet1/0/1. 

<Sysname> display garp timer interface Ethernet 1/0/1 

 

        GARP timers on port Ethernet1/0/1 

 

                Garp Join Time          : 20 centiseconds 

                Garp Leave Time         : 60 centiseconds 

                Garp LeaveAll Time      : 1000 centiseconds 

                Garp Hold Time          : 10 centiseconds 

garp timer { hold | join | leave } timer-value 

undo garp timer { hold | join | leave } 

Ethernet port view 

hold: Sets the GARP Hold timer. 

join: Sets the GARP Join timer. 

leave: Sets the GARP Leave timer. 

timer-value: Timeout time (in centiseconds) of the GARP timer (Hold, Join or Leave) to be set. 

Use the garp timer command to set a GARP timer (that is, the Hold timer, the Join timer, or the Leaver 

timer) for an Ethernet port. 

Use the undo garp timer command to restore the default setting of a GARP timer. 

By default, the Hold, Join, and Leave timers are set to 10, 20, and 60 centiseconds.  

Note that: 

z 

The setting of each timer must be a multiple of 5 (in centiseconds).  

z 

The timeout ranges of the timers vary depending on the timeout values you set for other timers. If 

you want to set the timeout time of a timer to a value out of the current range, you can set the 

timeout time of the associated timer to another value to change the timeout range of this timer. 

The following table describes the relations between the timers: