3com 5500-ei pwr Guia De Referência
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
1-27
z
To perform an FTP test successfully, the configured password must be consistent with the FTP
user password configured on the server.
z
This command applies to FTP tests only.
Examples
# Set the password for logging into the FTP server as remote-ping in an FTP test.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] remote-ping administrator ftp
[Sysname-remote-ping-administrator-ftp] test-type ftp
[Sysname-remote-ping-administrator-ftp] password remote-ping
probe-failtimes
Syntax
probe-failtimes times
undo probe-failtimes
View
remote-ping test group view
Parameters
times: Number of consecutive failed probes, in the range of 1 to 15.
Description
Use the probe-failtimes command to configure the number of consecutive times the probe fails before
the switch sends out a trap message.
Use the undo probe-failtimes command to restore the default.
By default, the switch sends a trap about probe failure each time when a probe fails.
Examples
# Configure the switch to send a trap after the probe in an ICMP test fails for three consecutive times.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] remote-ping administrator icmp
[Sysname-remote-ping-administrator-icmp] test-type icmp
[Sysname-remote-ping-administrator-icmp] probe-failtimes 3