3com 5500-ei pwr Guia De Referência

 

1-36 

test-failtimes times 

remote-ping test group view 

times: Number of times of consecutive test failure, in the range of 1 to 15. 

Use the test-failtimes command to configure the number of consecutive times a remote-ping test fails 

before the switch sends out a trap message.  

Use the undo test-failtimes command to restore the default.  

By default, the switch sends a trap about test failure each time when a test fails. 

# Configure the switch to send out a trap message after an ICMP test fails for three consecutive times.  

<Sysname> system-view 

System View: return to User View with Ctrl+Z 

[Sysname] remote-ping administrator icmp 

[Sysname-remote-ping-administrator-icmp] test-type icmp 

[Sysname-remote-ping-administrator-icmp] test-failtimes 3 

timeout time 

remote-ping test group view 

time: Timeout time for one probe, in the range of 1 to 60, in seconds.  

Use the timeout command to set the timeout time for a probe.  

Use the undo timeout command to restore the default value. 

The remote-ping client starts the probe timer after sending a test packet. If the remote-ping client 

receives no response before the timer expires, it considers that the current probe has timed out. 

By default, the probe timeout time is 3 seconds.