3com 5500-ei pwr Guia De Referência

 

1-40 

Related commands: remote-ping-agent enable, 

remote-ping-server tcpconnect, 

remote-ping-server udpecho. 

# Enable a remote-ping server.  

<Sysname> system-view 

System View: return to User View with Ctrl+Z 

[Sysname] remote-ping-server enable 

remote-ping-server tcpconnect ip-address port-number 

undo remote-ping-server tcpconnect ip-address port-number 

System view 

ip-address: IP address specified for a TCP listening service on the remote-ping server.  

port-number: Port number specified for a TCP listening service on the remote-ping server. The value 

ranges from 1 to 50000. It is not recommended to use some special ports (that is, those used for fixed 

functions, such as port 1701). Otherwise, the remote-ping test may fail. 

Use the remote-ping-server tcpconnect command to create a TCP listening service on the 

remote-ping server.  

Use the undo remote-ping-server tcpconnect command to remove the created TCP listening 

service.  

When performing a TCP connection test on a specified port of a remote-ping client, you must create a 

TCP listening on the remote-ping server if the server is an switch; otherwise, the TCP test may fail.  

Related commands: remote-ping-server enable. 

# Enable TCP listening, using 169.254.10.2 as the IP address and 9000 as the port number. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z 

[Sysname] remote-ping-server tcpconnect 169.254.10.2 9000 

remote-ping-server udpecho ip-address port-number 

undo remote-ping-server udpecho ip-address port-number