3com 5500-ei pwr Guia De Referência

 

1-3 

System view 

None 

Use the am trap enable command to enable the access management trap function. 

Use the undo am trap enable command to disable the access management trap function. 

By default, the access management trap function is disabled. 

# Enable the access management trap. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] am trap enable 

display am [ interface-list ] 

Any view 

interface-list: Port list. You need to provide this argument in the format of { interface-type 

interface-number [ to interface-type interface-number ] } &<1-10>, where interface-type is 

port type, interface-number is port number, and &<1-10> means that you can specify up to 

ten ports/port lists. 

Use the display am command to display the current access management configuration, 

including the status (enabled/disabled), and the access management IP address pool 

configuration information. 

If you do not specify the interface-list argument, this command displays the current access 

management configuration of all the ports. 

# Display the access management configurations of Ethernet 1/0/1 and Ethernet 1/0/2. 

<Sysname> display am Ethernet 1/0/1 Ethernet 1/0/2 

Ethernet1/0/1 

 Status       : enabled 

 IP Pools     : 10.10.1.1(19) 10.10.1.30(1)