3com 5500-ei pwr Guia De Referência

 

1-2 

The global broadcast suppression setting configured by the broadcast-suppression command in 

system view takes effect on all Ethernet ports in the system except for the reflection ports, stack ports 

and ports having their own broadcast suppression settings. 

If you configure broadcast-suppression command in both system view and Ethernet port view, the 

configuration in Ethernet port view will take effect.  

 

# Allow incoming broadcast traffic on Ethernet 1/0/1 to occupy at most 20% of the total transmission 

capacity of the port and suppress the broadcast traffic that exceeds the specified range.  

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] interface ethernet 1/0/1 

[Sysname-Ethernet1/0/1] broadcast-suppression 20 

# Set the maximum number of broadcast packets that can be received per second by the Ethernet 1/0/1 

port to 1,000. 

[Sysname-Ethernet1/0/1] broadcast-suppression pps 1000 

copy configuration source { interface-type interface-number | aggregation-group  source-agg-id } 

destination { interface-list [ aggregation-group  destination-agg-id ] | aggregation-group 

destination-agg-id } 

System view 

interface-type: Port type. 

interface-number: Port number. 

source-agg-id: Source aggregation group number, in the range of 1 to 416. The port with the smallest 

port number in the aggregation group is used as the source port.  

destination-agg-id: Destination aggregation group number, in the range of 1 to 416.  

interface-list: Destination port list, interface-list = interface-type interface-number  [ to interface-type 

interface-number ]  &<1-10. &<1-10> means that you can input up to 10 ports/port ranges. 

Use the copy configuration command to duplicate the configuration of a port to specified ports to keep 

consistent configuration on them.