3com 5500-ei pwr Guia De Referência
3-1
3
RIP Configuration Commands
The term router in this chapter refers to a router in a generic sense or an Ethernet switch running a
routing protocol.
routing protocol.
RIP Configuration Commands
checkzero
Syntax
checkzero
undo checkzero
View
RIP view
Parameters
None
Description
Use the checkzero command to enable the must be zero field check for RIP-1 packets.
Use the undo checkzero command to disable the must be zero field check for RIP-1 packets.
By default, RIP-1 performs the must be zero field check.
According to the protocol (RFC 1058) specifications, some fields in RIP-1 packets must be zero and
these fields are called zero fields. You can use the checkzero command to enable/disable the must be
these fields are called zero fields. You can use the checkzero command to enable/disable the must be
zero
field check for RIP-1 packets. When the must be zero field check is enabled, if the must be zero
field in an incoming RIP-1 packet is non-zero, the packet will be rejected.
Examples
# Disable the must be zero field check for RIP-1 packets.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] rip
[Sysname-rip] undo checkzero