3com 5500-ei pwr Guia De Referência
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
3-4
display rip interface
Syntax
display rip interface
View
Any view
Parameters
None
Description
Use the display rip interface command to display RIP interface information.
Examples
# Display RIP interface information.
<Sysname> display rip interface
RIP Interface: public net
Address Interface Ver MetrIn/Out Input Output Split-horizon
1.0.0.1 Vlan-interface100 2 0/1 on on on
Table 3-2
Description on the fields of the display rip interface command
Field
Description
Address
IP address of the interface running RIP (You
need to use the network command to enable the
network segment on which the address resides.)
need to use the network command to enable the
network segment on which the address resides.)
Interface
Name of the interface running RIP. The IP
address of the interface corresponds to that in
the Address field.
address of the interface corresponds to that in
the Address field.
Ver
Version of RIP running on the interface
MetrIn/Out
Additional metric added when a route is
received/sent
received/sent
Input
Indicates whether to allow the interface to
receive RIP packets (on means yes; off means
no).
receive RIP packets (on means yes; off means
no).
Output
Indicates whether to allow the interface to send
RIP packets (on means yes; off means no).
RIP packets (on means yes; off means no).
Split-horizon
Indicates whether split horizon is enabled (on
means yes; off means no)
means yes; off means no)
display rip routing
Syntax
display rip routing