3com 5500-ei pwr Guia De Referência

 

4-13 

undo peer peer-address minimum-ttl 

MSDP view 

peer-address: IP address of the MSDP peer to which the minimum TTL setting will apply.  

ttl-value: Minimum required TTL value, ranging from 0 to 255. 

Use the peer minimum-ttl command to configure the minimum required TTL value for a multicast 

packet encapsulated in an SA message to be forwarded to the specified MSDP peer. 

Use the undo peerminimum-ttl command to restore the system default.  

By default, the minimum required TTL value is 0. 

Related commands: peer. 

# Set the minimum required TTL value of encapsulated multicast packet to 10 so that only those 

multicast data packets with a TTL value greater than or equal to 10 can be forwarded to the MSDP peer 

110.10.10.1.  

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] msdp 

[Sysname-msdp] peer 110.10.10.1 minimum-ttl 10 

peer peer-address request-sa-enable 

undo peer peer-address request-sa-enable 

MSDP view 

peer-address: Specifies an MSDP peer by its IP address.  

Use the peer request-sa-enable command to enable the switch to send an SA request message to the 

specified MSDP peer upon receipt of a Join message.  

Use the undo peer request-sa-enable command to remove the configuration.  

By default, upon receipt of a Join message, the switch sends no SA request message to the MSDP peer 

but waits for the next SA message. 

Related commands: cache-sa-enable.