3com 5500-ei pwr Guia De Referência

 

4-16 

Use the peer sa-request-policy command to filter the SA request messages from the specified MSDP 

peer.  

Use the undo peer sa-request-policy command to restore the default.  

By default, the switch accepts all SA request messages from any MSDP peer.  

If no ACL is specified, all SA requests will be ignored. If an ACL is specified, only those SA request 

messages from the multicast groups that match the ACL rule will be processed and others will be 

ignored. 

Related commands: peer. 

# Configure the device to accept SA request messages from MSDP peer 175.58.6.5 for multicast 

groups in the range of 225.1.1.0/24 and ignore all other SA request messages. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] acl number 2001 

[Sysname-acl-basic-2001] rule permit source 225.1.1.0 0.0.0.255 

[Sysname-acl-basic-2001] quit 

[Sysname] msdp 

[Sysname-msdp] peer 175.58.6.5 sa-request-policy acl 2001 

reset msdp peer peer-address 

User view 

peer-address: Specifies an MSDP peer by its IP address.  

Use the reset msdp peer command to reset the TCP connection with the specified MSDP peer and 

clear all statistics information about that MSDP peer.  

Related commands: reset msdp statistics. 

# Reset the TCP connection with the MSDP peer 125.10.7.6 and clear the statistics about the MSDP 

peer. 

<Sysname> reset msdp peer 125.10.7.6