3com 5500-ei pwr Guia De Referência

 

1-12 

# Display the global queue scheduling configuration.  

<Sysname> display queue-scheduler 

 Queue scheduling mode: weighted round robin 

 weight of queue 0: 1 

 weight of queue 1: 2 

 weight of queue 2: 3 

 weight of queue 3: 4 

 weight of queue 4: 5 

 weight of queue 5: 9 

 weight of queue 6: 13 

 weight of queue 7: 15 

Refer to 

 for the description of the output fields. 

line-rate { inbound | outbound } target-rate [ burst-bucket burst-bucket-size ] 

undo line-rate{ inbound | outbound } 

Ethernet port view 

inbound: Limits the inbound packet rate. 

outbound: Limits the outbound packet rate. 

target-rate: Total target rate (in kbps). The range of this argument varies with port type as 

follows: 

z 

Fast Ethernet port: 64 to 99,968; 

z 

GigabitEthernet port: 64 to 1,000,000. 

The granularity of port rate limit is 64 kbps. Assume that the value you provide for the 

target-rate argument is in the range N*64 to (N+1)*64 (N is a natural number), it will be 

rounded off to (N+1)*64.  

burst-bucket burst-bucket-size: Specifies the maximum burst traffic size (in KB). This is 

the buffer size provided for burst traffic while traffic is being forwarding or received at the 

rate of target-rate. The burst-bucket-size argument must be an integer power of 2, in the 

range of 4 to 512. If it is not specified, 512 KB applies by default. 

Use the line-rate command to limit the rate of the inbound or outbound packets on a port.   

Use the undo line-rate command to cancel the line rate configuration.