3com 5500-ei pwr Guia De Referência

 

1-5 

undo mirroring-group group-id monitor-port monitor-port 

System view, Ethernet port view 

group-id: Number of a port mirroring group, in the range 1 to 20. 

monitor-port monitor-port: Specifies the destination port for port mirroring. monitor-port is 

available in system view only, and there is no such argument in Ethernet port view. 

Use the mirroring-group  monitor-port  command to configure the destination port for a 

local mirroring group or a remote destination mirroring group. 

Use the undo mirroring-group monitor-port to remove the destination port of a local 

mirroring group or a remote destination mirroring group. 

Note that: 

z 

You cannot configure a member port of an existing mirroring group, a member port of 

an aggregation group, a fabric port or a port enabled with LACP or STP as the 

destination port. 

z 

Before configuring a destination port for a local mirroring group, make sure that the 

corresponding mirroring group has already been created.  

z 

It is recommended that you use a destination port for port mirroring purpose only. Do 

not use a destination port to transmit other service packets.  

Related commands: display mirroring-group. 

# Configure Ethernet 1/0/4 as the destination port of local mirroring group 1. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] mirroring-group 1 local 

[Sysname] mirroring-group 1 monitor-port Ethernet 1/0/4 

mirroring-group group-id reflector-port reflector-port 

undo mirroring-group group-id reflector-port reflector-port 

System view, Ethernet port view