3com 5500-ei pwr Guia De Referência

 

1-5 

PSE Software Version        :290 

PSE Hardware Version        :000 

PSE CPLD Version            :078 

PSE Power-Management mode   :auto 

Table 1-3 display poe powersupply command output description 

PSE ID 

Identification of the PSE 

PSE Legacy Detection 

The enabled/disabled status of the nonstandard 
PD detection 

PSE Total Power Consumption 

Total power consumption of the PSE 

PSE Available Power 

Available power of the PSE 

Power Peak Value 

Peak power value of the PSE 

Power Average Value 

Average power value of the PSE 

Power Software Version 

Version of the PSE software 

Power Hardware Version Version 

of the PSE hardware 

PSE CPLD Version 

Version of the PSE complex programmable 
logical device (CPLD) 

PSE Power-Management mode 

PoE management mode on the port when the 
PSE is overloaded:  

z 

The  auto keyword indicates that the auto 
mode is adopted, that is, the PoE 
management mode based on the PoE priority 
of the port is adopted 

z 

The  manual keyword indicates that the 
manual mode is adopted in the PoE 
management on the port 

 

Any view 

None 

Use the display poe temperature-protection command to display the enable/disable status of the 

PoE over-temperature protection function on the switch. 

Related commands: poe temperature-protection enable. 

# Display the enable/disable status of the PoE over-temperature protection function on the switch.