3com 8807 Guia De Referência
OSPF Configuration Commands
425
display ospf cumulative
Syntax
display ospf [ process-id ] cumulative
View
Any view
Parameter
process-id: Process ID of OSPF. The command is applied to all current OSPF
processes if you do not specify a process ID.
processes if you do not specify a process ID.
Description
Use the display ospf cumulative command to view the OSPF cumulative
information.
information.
Example
# Display the OSPF cumulative information.
<SW8800> display ospf cumulative
OSPF Process 1 with Router ID 1.1.1.1
Cumulations
IO Statistics
Type Input Output
Hello 225 437
DB Description 78 86
Routing preference
Routing preference of OSPF. The internal route of OSPF includes
intra/inter area route, and its default routing preference is 10.
While that of the external route of OSPF is 150 by default
intra/inter area route, and its default routing preference is 10.
While that of the external route of OSPF is 150 by default
Default ASE parameters
Default ASE parameters of OSPF, including metric, type and tag
SPF computation count
SPF computation count since OSPF is enabled
Area Count
Areas for connection to this router
Nssa Area Count
Number of NSSA areas
SPF scheduled
SPF scheduled (flag)
Interface
Interface name belonging to this area
Cost
Cost of routes
State
State information
Type
Network type of OSPF interface
Priority
Priority
Designated Router
IP address of designated router (DR)
Backup Designated
Router
Router
IP address of backup designated router (BDR)
Timers
OSPF timers, defining as follows:
Hello
Interval of hello packet
Dead
Interval of dead neighbors
Poll
Interval of poll
Retransmit
Interval of retransmitting LSA
Transmit Delay
Delay time of transmitting LSA
Table 56 Description of the fields of the display ospf brief command
Field Description