3com 8807 Guia De Referência
434
C
HAPTER
25: OSPF C
ONFIGURATION
C
OMMANDS
display ospf routing
Syntax
display ospf [ process-id ] routing
View
Any view
Parameter
process-id: ID of an OSPF process. The command is applied to all current OSPF
processes if you do not specify a process ID.
processes if you do not specify a process ID.
Description
Use the display ospf routing command to view information about the OSPF
routing table.
routing table.
Example
# View the OSPF routing table.
<SW8800> display ospf routing
OSPF Process 1 with Router ID 1.1.1.1
Routing Tables
Routing for Network
Destination Cost Type NextHop AdvRouter Area
10.110.0.0/16 1 Net 10.110.10.1 1.1.1.1 0
10.10.0.0/16 1 Stub 10.10.0.1 3.3.3.3 0
Total Nets: 2
Intra Area: 2 Inter Area: 0 ASE: 0 NSSA: 0
Table 65 Description of the fields of the display ospf retrans-queue command
Field
Description
RouterID
Router ID of neighbor router
Address
Address of the interface, through which neighbor routers communicate with the
router
router
Interface
Address of the interface on the network segment
Area
Number of an OSPF area
Type
Type of the LSA
LSID
Link State ID of the LSA
AdvRouter Router ID of the router originating the LSA
Table 66 Description of the fields of the display ospf routing command
Field
Description
Destination
Destination network segment
Cost
Cost of route
Type
Type of route
NextHop
Next hop of route
AdvRouter
Router ID of the router advertising the route
Area
Area ID
Intra Area
Number of intra-area routes
Inter Area
Number of inter-area routes
ASE
Number of external routes