3com nj200 Manual Suplementar
3 C O M
®
N J 2 0 0 N E T W O R K J A C K — V L A N S & T R A F F I C P R I O R I T I Z AT I O N
11
Setting Up Traffic Priority Schedule Policy
Use this setting to modify how the switch will receive frames from each queue:
1. Open
3Com Central Configuration Manager
and select
Devices
from the main menu.
2. From the list of devices, select an NJ200/NJ205 and then select
Property
. You can
also highlight and right-click on the NJ200/NJ205 and select
Property
.
3. Click on the
Hardware Settings
tab to view and configure the
Priority Schedule
Policy
settings. You should see a window like this:
4. Under
Priority Schedule Policy
, choose one of the following:
a) 8,4,2,1 weighted fair queuing (default)
b) Strict Priority Scheme (all queues weighted the same)
5. When all configuration settings are complete, click on the
Apply
button, which
opens a password-prompt window. After the password is accepted a screen will
appear summarizing the new settings. Click
appear summarizing the new settings. Click
OK
to accept and close configuration
window.
Figure 8. Traffic priority schedules are individually
configured for each PAN port.
configured for each PAN port.