Xerox xd100 Guia Do Utilizador

1.  Ensure that the computer and the

WorkCentre are turned off.

2.  Plug the IEEE-1284 cable into the

parallel port on the WorkCentre.

3.  Plug the other end of the IEEE-1284

cable into the computer.

4.  Ensure that the power cord is plugged into the WorkCentre and then

into a grounded outlet.

•

 

Do not attach your WorkCentre to a pass-through port of another
device (scanner, CD-ROM drive, tape drive, Zip

™

 drive or external

disk).

5.  Turn on the PC.
 Note:  Close all applications before installing the printer driver.
6.  Start Windows on your computer.
7.  Insert the WorkCentre XD CD-ROM into the CD-ROM Drive.

8. Choose File from the menu bar in Program Manager, and then choose

the Run… command.

9. Type D:\SETUP (or the appropriate drive letter depending on your CD-

ROM Drive) in the command line box.  Click on the OK button to
proceed.

10. Follow the on-screen instructions.

11. When the install is complete, restart Windows and turn on the

WorkCentre.

8.  Click on the Start button and then choose the Run menu option.

9. Type D:\SETUP (or the appropriate drive letter depending on your CD-

ROM Drive) in the command line box.  Click on the OK button to
proceed.

10. Turn on the WorkCentre.

11. Follow the on-screen instructions.

•

 

If you wish to print a test page, ensure paper is loaded and then click
the Yes button.