Xerox 2101 Guia Do Utilizador
8.5 Auditron Menu
313
System Administrator Mode Settings
When setting/modifying the copy limit:
(1) Select Key in Copy Limit.
(1) Select Key in Copy Limit.
The input area is blank.
(2)Using the keypad, enter 0 or a value within the range of 0 to
6,553,500 in increments of 100, and then select Confirm.
The input number is shown in the Copy Limit display. The input area will remain
as blank if you entered “0”.
as blank if you entered “0”.
6
Select Close when all the settings have been checked.
The display returns to the Create/Modify Accounts screen.
7
Select Reset Copy Volume to reset the current copy volume.
“0” is displayed in the Copy Volume display.
8
Repeat Steps 3 to 7 to modify the settings of other accounts.
9
Select Close when all the settings have been checked.
The display returns to the Auditron Menu screen.
10
Exit from the Auditron Administrator Mode.
●
● If you enter “0” for the copy limit,
nothing will be shown in the Copy
Limit display and no copy limit
setting is made. Also, if no value is
entered, no copy limit setting is
made.
Limit display and no copy limit
setting is made. Also, if no value is
entered, no copy limit setting is
made.
● If you made a mistake while entering
the password, press the C button to
clear and then re-enter.
clear and then re-enter.