Xerox 2101 Manual Suplementar

Frame Type selection
(Network Setup>Protocol 
Setup>IPX/SPX Setup)
Enable NDS
(Network Setup>Service 
Setup >PServer 
Setup >NDS

Setup)

Invalid frame size.

The network hub is not connected to a Novell server when 
the Fiery EX2101 tries to bind.

Warning! IPX network
number is zero.

No other IPX machine can be found on the network, or 
the network hub is not connected to the network when the 
Fiery EX2101 tries to bind. When this occurs, the network 
number defaults to zero.

No NDS trees found.

No NDS trees were found on the Novell network. Check 
to see that the frame types on the Fiery EX2101 are 
properly

configured.

Select NDS Tree
(Network Setup>Service 
Setup >PServer Setup >

NDS Setup)

Warning! Selecting a new 
NDS tree deletes 
Bindery

setup.

You have previously connected the Fiery EX2101 to a 
different NDS tree. NetWise supports only a single NDS 
tree connection. To avoid a potential conflict with an 
existing tree connection (for example, if the connection 
was made through a NetWare 4.x server in emulation 
mode), all bindery settings will be deleted.
If you choose OK, and choose Yes in the following message 
(Delete Bindery setup and continue?), bindery settings are 
deleted and have to be re-entered in Bindery Setup.
To avoid deleting the bindery settings, press Menu, or 
select OK and choose No in the following message (Delete 
Bindery setup and continue?).
Repeat NDS Setup without changing the NDS tree, or exit 
to Bindery Setup to review your current bindery settings. 

Navigating NDS tree
(Network Setup>Service 
Setup >PServer Setup >

NDS Setup)

___ is empty.

The chosen container contains no sub-containers or objects 
relevant to the current mode of navigation.

Bindery Setup
(Network Setup>Service 
Setup >PServer Setup >

Bindery Setup)

If you also plan to use NDS, 
set up NDS before Bindery.

No NDS settings are present. You are reminded to perform 
NDS Setup before Bindery Setup in case your network 
includes both NDS and bindery servers.