Xerox 5550 Guia Do Utilizador
Printing on Specialty Media
Phaser® 5550 Printer
4-42
■
Insert Small US postcards short-edge feed and facedown into Tray 1 (MPT) only.
Place the top of the postcard toward the rear of the printer.
Place the top of the postcard toward the rear of the printer.
Envelope Tray
■
Insert Large US and A6 postcards long-edge feed and faceup into the optional
Envelope Tray. Place the top of the postcard toward the left of the tray.
Envelope Tray. Place the top of the postcard toward the left of the tray.
2.
Adjust the paper guides to the size of the postcards.
3.
If prompted on the control panel, press the OK button to accept the paper size and type
that are shown. If you have changed the paper size or type, do the following:
that are shown. If you have changed the paper size or type, do the following:
a.
Select
Change setup
, and then press the OK button.
b.
Select
Card Stock
, and then press the OK button.
c.
Select the paper size, and then press the OK button to save your selection.
4.
In the printer driver, select Card Stock as the paper type, or Tray 1 (MPT) or Tray 2 as
the paper source.
the paper source.
5550-257
5550-278