Xerox 8860 Guia Do Utilizador
Fax Defaults
System Administrator Guide
6-4
Transmission Header: This setting turns Off or On including the Line Name in the
Transmission Header. The default setting is On.
Transmission Header. The default setting is On.
Dial Pause: This setting determines the duration of each pause when dialing to send a fax.
Select the Dial Pause number of seconds from the drop-down list. The default setting is
3 Seconds or 2 Seconds for South Africa and Region 5.
Select the Dial Pause number of seconds from the drop-down list. The default setting is
3 Seconds or 2 Seconds for South Africa and Region 5.
Dial Delay: This setting determines the delay after hearing the dial tone before dialing to send
a fax. Select the Dial Delay number of seconds from the drop-down list. The default setting is
0 Seconds.
a fax. Select the Dial Delay number of seconds from the drop-down list. The default setting is
0 Seconds.
Fax Receive Setup
Paper Supply: This setting determines which tray the system takes paper from to print fax
jobs. If no value is selected for Paper Supply, this field defaults to Tray 2.
jobs. If no value is selected for Paper Supply, this field defaults to Tray 2.
■
Auto Select: The system determines which tray to use depending on the fax job.
■
Tray 1: The system takes paper from Tray 1.
■
Tray 2: The system takes paper from Tray 2.
■
Tray 3: The system takes paper from Tray 3*.
■
Tray 4: The system takes paper from Tray 4*.
* Available only if optional tray is installed.
Fax Receive: This setting turns Off or On answering incoming telephone calls and scanning
them for fax information. The default setting is On.
them for fax information. The default setting is On.
Answer Delay: This setting specifies the number of rings that occur before the system
answers incoming telephone calls. The default setting is 1 Ring, except for Australia and
Region 1, whose default setting is 2 Rings.
answers incoming telephone calls. The default setting is 1 Ring, except for Australia and
Region 1, whose default setting is 2 Rings.
Secure Receive: This setting turns On or Off requiring a numeric password to print received
faxes. The default setting is Off.
faxes. The default setting is Off.
Secure Receive Password: Enter the 4-digit password that is required to print received faxes
in this field. If a password is already defined, this field displays ****.
in this field. If a password is already defined, this field displays ****.
Junk Fax Prevention: This setting turns On or Off only printing faxes that are received from
telephone numbers in the individual speed dial directory. The default setting is Off.
telephone numbers in the individual speed dial directory. The default setting is Off.
2-Sided Fax Printing: This setting specifies 2-sided fax printing options. The default setting
is 1-1. The following values are supported:
is 1-1. The following values are supported:
■
1-1: Print faxes single-sided (on one side of a sheet of paper).
■
1-2: Print faxes double-sided (on both sides of a sheet of paper).