Xerox 8560 Guia Do Utilizador

If you notice unusual noises or odors:

Turn off the printer immediately.

Disconnect the power cord from the electrical outlet. 

Call an authorized service representative to correct the problem.

The power cord is attached to the printer as a plug-in device at the back of the printer. If it is 
necessary to disconnect all electrical power from the printer, disconnect the power cord from 
the electrical outlet.

Do not remove the covers or guards that are fastened with screws unless you are 

installing optional equipment and are specifically instructed to do so. Power should be OFF 
when performing these installations. Disconnect the power cord when removing covers and 
guards for installing optional equipment. Except for user-installable options, there are no parts 
that you can maintain or service behind these covers.

Leave the printer on for optimum performance; it does not pose a safety hazard.

The following are hazards to your safety:

■

The power cord is damaged or frayed.

■

Liquid is spilled into the printer.

■

The printer is exposed to water.

If any of these conditions occur, do the following:

Turn off the printer immediately.

Disconnect the power cord from the electrical outlet.

Call an authorized service representative.

■

Do not attempt any maintenance procedure that is not specifically described in the 
documentation supplied with your printer.

■

Do not use aerosol cleaners. The use of supplies that are not approved may cause poor 
performance and could create a hazardous condition.

■

Do not burn any consumables or routine maintenance items. For information on Xerox 
supplies recycling programs, go to