Xerox 123 Manual Do Utilizador

Página de 364
Fax/Internet Fax Procedure 
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide
79
• Not available in the double-sided mode.
NOTE: In both single-sided and double-sided modes, scanning a document at its 
original size or smaller is recommended. An enlarged image may be cut off during 
transmission.
2. Select the Features
The features available on the [Basic Features] screen are those used most often.
NOTE: Only those features relevant to the machine configuration will be available.
1.
Press the <All Services> button 
on the control panel.
2.
Select [Fax/Internet Fax] on the 
touch screen. Ensure that the 
[Basic Features] screen is 
displayed.
NOTE: If the Authentication feature 
is enabled, you may be required to 
enter the user ID and password (if 
one is set up). If you need assistance, contact the Key Operator.
3.
Press the <Clear All> button once on the control panel to cancel any previous 
selections.
4.
Select the button for the feature required. If [More] is selected, select [Save] to 
confirm the selected feature or [Cancel] to return to the previous screen.
If necessary, press one of the tabs and configure the fax/Internet Fax settings. For 
information on the individual tabs, refer to the following.
Basic Features - Fax/Internet Fax – page 87
Image Quality - Fax/Internet Fax – page 90
Scan Options - Fax/Internet Fax – page 90
Send Options - Fax/Internet Fax – page 93
On-hook/Others - Fax – page 103
3. Specify the Destination
The following explains how to specify a destination. The machine allows the following 
dialing methods (fax numbers or e-mail addresses).
<Clear All> button
<All Services> button