Xerox 200e Manual Do Utilizador

4

Your Tektronix printerÕs internal NetWare interface implements the 
PSERVER model.  Under this model, print jobs are stored in queues 
(directories) on a Þle server.  A print server takes print jobs from the queues 
and sends them to printers.  In your Tektronix printer, the print server 
resides within the internal interface of the printer, so in effect, the print 
server and the printer are one.  The printer logs in to a Þle server using a 
login connection to service speciÞed queues. 

Your Tektronix printerÕs internal NetWare interface supports NetWare 
versions 2.2, 3.11, and 4.0.  It supports up to 32 queues and 8 Þle servers in 
any combination.  No additional VAPs (Value Added Procedures), NLMs 
(Network Loadable Modules), or TSRs (Terminate Stay Resident programs) 
are required to install your Tektronix printer on the network.

Before you begin the NetWare conÞguration, make sure that you have 
completed the following steps:

■

Your printer should be set up and connected to the network.  See 
your printerÕs user manual for information about setting up and 
turning on the printer.  For information about connecting the 
printer to the network, see ÒEthernet connectionÓ on page 2-6.

■

If you are using Windows, the Tektronix driver for your printer 
should be installed on every PC that will be sending print jobs to 
the printer.  For details on driver installation, see the printerÕs user 
manual.